EZ Counter Computerized Length Control
EZ-Counter Computerized Length Controller for MACH II gutter machines. Complete with material tracking. Can be retro-fitted. Program up to 50 lengths, tracks material, offers miter options on all gutter machines, operate in feet and inches, inches only or centimeters. Operates as an Easy-touch screen.
CVR Machine Cover
K-Tex synthetic canvas material, form fitted to body of machine.
NTM200 – Computer Controller
The NTM 200 comes standard with the new WAV wall panel machine, and is currently available for the SSQ II and SSH roof panel machines.
Improved Look & Operation:
Run Out Stand
Supports gutter as it runs out of machine. Tripod style stands with 1 adjustable leg for leveling and conveyor roller to support gutter. One stand recommended for every 20’ of gutter. Adjustable in height from 31 ½” to 45”.
***Available In Sets Of Three***
Turnstile Reel Stand
Machine mounted stand for holding reeled coils of material. Rotates 360 degrees for ease of loading. Machine capacity is 3 total.
RL16 or RL20 – Adjustable width reels for 11-3/4” through 15” wide coil for 5” or 6” gutters.
Used to transfer loaded coils from one turnstile reel stand to the other. (1 set / machine needed)
Mechanically advantaged forward pulling shear for cutting 5” & 6” gutter to length.
5/6 Coil Cradle
Used to hold full or partial coils for 5” and 6” gutter. Can be machine or floor mounted. Capacity 700lbs.
Back Flange 1″ and 1 1/2″
Forms 1” or 1 ½” flange on back of 5” or 6”gutter eliminating the need for flashing. Used with 5” or 6” machine only.
Bottom Bead Assembly
Adds unique design to bottom of gutter.
Riser pads to raise Mach II machines off of decking – available in 2 configurations: 6”-8” Riser Pads or 10”-12” Riser Pads.
Forms a 5/16” hook on the back of the gutter for use with free float hanger system. Also accommodates standard hangers or spike and ferrule.