• (713) 263-1522
  • Email KBS

    • SSR™ MultiPro JR. Roof Panel Machine

    Residential / Light Commercial Multi-Profile Roof Panel Machine

    • The state-of-the-art SSR™ MultiPro Junior Roof Panel Machine can produce up to seven different panel profiles in variable widths, multiple gauges, and various material types
    • Industry’s best warranty

    ***Please Refer To “Profiles & Ribs” Tab Below For Machines Forming Capabilities***

    ***Machine Images May Display Optional Features Not Included In Standard Pricing***

     

    Contact KBS!   Engineering Data

     

     

    Categories: , ,

    Standard Features

    • Polyurethane Drive Rollers
    • Powder-Coated Frame & Covers
    • Length Control Limit Switch
    • 100-Foot, 10 Gauge, 20 Amp Extension Cord
    • Waterproof NEMA 4 Electrical System
    • (2) Run-Out Tables (10-Foot Sections Each)
    • Forward Pulling, Easy Cut Shear
    • One Expandable Arbor / Reel
    • Push Button RUN/JOG Controls at Entry & Exit Ends
    • Welded Tubular Steel Frame
    • Dual Overhead Reel Rack
    • UL Rated Panels (Must Be Certified by UL for Recognition)
    • Industry’s Best Warranty
    • Choice of: EZE-Change™ Profile Roller System with Shear Dies
    • Choice of: One Pair of Bead, Pencil, Striation or V-Rib Rollers

    Specifications

    SSR Panel Machines
    • Length: 12’ 10” (3.9m)
    • Width: 3’ 10” (1.2m)
    • Height with Over Head Rack: 4’ 3” (1.3m)
    • Height without Over Head Rack: 1’ 10” (.6m)
    • Weight: 2,275 lbs. (1,030kg)
    SSR On Trailer
    • Length: 17’ 6” (5.3m)
    • Width: 7’ (2.1m)
    • Height with Reel: 6’ 3” (1.9m)
    • Weight: 3,975 lbs. (1,800kg)
    Coil Widths
    • 15” to 20” (380mm to 508mm)
    Finished Panel Widths
    • 10” to 16” (254mm to 406mm) – Note: Variable Depending on Panel Profile
    Materials Formed
    • Painted Steel: 30 ga. to 24 ga. (.3mm to .6mm) (coated galvanized, aluminized)
    • Painted Aluminum: .027” to .040” (.7mm to 1.0mm)
    • Copper: 16 oz. to 20 oz. 3/4 Hard (.5mm to .7mm)
    Shear
    • Manually Powered, Infinitely Adjustable, Hardened Tool Steel Blades & Shear Dies
    Drive
    • Electrically Driven Polyurethane Rollers via Chain & Sprocket
    Speed
    • 30 ft./min (9m/min) Approx.

    Profiles & Ribs

    Available Profile List For The SSH

    Inch standing seam roof panel machine - Karr's Building Supply

    SSR100

    1” high x 1/2“ wide (25.4mm x 12.7mm) mechanically seamed panel. Includes a hand seamer and clip relief. ~ View Specifications

    1 1/2 inch snap seam roof panel machine - Karr's Building SupplySSR450

    1-1/2” high x 1/4” wide (38.1mm x 6.4mm) snap clip panel / snap lock panel. Includes clip relief rollers. ~ View Specifications

    FFR100

    1“ snap seam (25.4mm) with slotted fastener flange for clipless installation. Includes clip relief rollers and automatic “no chip” rotary slotter. ~ View Specifications

    Roll Formed Onsite T-Panel - Karr's Building SupplyT-Panel

    1/2” to 2” high (12.7mm to 50.8mm)

    • Leg height is profile dependent.
    • Most panel profiles can produce a T-Panel. ~ View Specifications

    1 1/2 inch standing seam roof machine - Karr's Building SupplySSR150

    1-1/2” high x 1/2” wide (38.1mm x 12.7mm) mechanically seamed panel. Includes a hand seamer and clip relief. ~ View Specifications

    1 1/2 Inch Snap Seam Roof Machine - Karr's Building SupplySSR450SL

    1-1/2” high x 1/4” wide (38.1mm x 6.4mm) snap clip panel / snap lock panel. Includes clip relief rollers. ~ View Specifications

    Residential Roof Panel Machine - Karr's Building SupplyFFR150

    1-1/2” snap seam (38.1 mm) with slotted fastener flange for clipless installation. Includes clip relief rollers and automatic “no chip” rotary slotter. ~ View Specifications

    These field formed panels have demonstrated compliance with UL580, Class 90 when a UL certificate accompanies the machine producing panel.

    * Can make T-Panel
    ** SSQ275 not available as FREE profile on standard SSQ machine — contact KBS for details.
    † Suitable for Zinc
    All roller systems include shear dies and clip relief rollers.

    • SSQ100, SSQ150 and SSQ450/450SL Roller Systems all use identical left side roller sets.
    • FFQ100 and FFQ150 also share identical left side roller sets.
    • FWQ100 and FWQ150 also share partial roller sets.

    If you purchase or own one of these roller systems, contact Karr’s Building Supply to add any of the other right side systems!

    Available Rib Rollers For The SSQII

    Clip Relief

     

    Pencil Ribs
    – Small or Large

     

    Striation Ribs

     

    Bead Ribs
    – Standard or Wide

     

    V-Ribs
    – Small or Large

    Options

    Available Options For The SSH

    Trailer

    NATM Compliant, 12,000 lb. tandem axle trailer used for towing any NTM roofing machine directly to the jobsite. Equipped with crane lifting eyes, 4 drop-foot jack stands and electric brakes w/ breakaway kit.

     

    Machine Cover

    Machine Cover K-Tex synthetic canvas material, form fitted to body of machine.

     

     

    ROSR-10 – Run Out Table

    Table attaches to shear and is used to support panel as it exits the machine. Adjustable leg allows variation in height from 25” to 43”. Available in connectable 10 ft. sections.

     

    Duel Overhead Reel Stand

    Machine mount overhead stand for holding up to two Expandable Arbors with coil or two De-coiler Reels with coil for a combined total capacity of 6,000 lbs.

     

    Expandable Arbor

    Used for holding coil. This arbor expands to the inside diameter of the coil for faster, easier loading. Can accommodate coils with 16” to 20” ID. Capacity is 3,000 lbs. when used with Dual Overhead Reel Stand or Single Free Standing De-Coiler.

     

    Single Free Standing De-Coiler

    A Remote stand used at the entry end of the machine to hold one Expandable Arbor with coil or one De-Coiler Reel with coil. Total capacity 3,000 lbs.Shown with optional DR01-EX.

     

    Pencil, Bead, V and Striation Rollers

    A variety of ribs used to aesthetically enhance standing seam panels.

    HS-1 Hand Seamer
    • Hand held device used to single-lock mechanically seamed panels.

     

     

    NTM200 Controller Features
    • 12” (305mm) color touchscreen
    • Download from Applicad, TopView, or Excel
    • Quickly transfer cut lists from a USB drive
    • Notches can be turned on or off, and the offset distance can be specified
    • Removable, water-resistant, suitcase-style housing
    • Program up to 600 different lengths
    • Integrated coil length calculator
    • Help and Error screens
    • Quick and easy entry from home screen

     

     

    Improved Look & Operation:
    • 12.1” color touch-screen
    • Increased memory – program up to 600 different lengths
    • Integrated coil length calculator
    • Help & Error Screens
    • Download from Applicad, TopView or Excel
    • Quickly transfer cut lists from a USB drive
    • Removable, water resistant, suitcase style housing
    • Quick / Easy entry from home screen
    • Adjustable articulating arm
    • Rotate, raise or lower controller for your perfect view

     

     

    Quick Change Power Pack

    Used to quickly field convert machine from gas engine to electric motor and back again as needed.


    Additional Options

    EZE CHANGETM Roller System
    • Forming stations mounted on aluminum rails used to form various panel profiles. Includes shear dies.
    RRF – Frame Assembly
    • Used to mount additional rib or striation rollers making changeovers fast and simple.


    Power Options

    ELEC1 1.5 Hp, 120VAC, 60Hz, 1Ph, 18Amps

    ELEC2 1.5 Hp, 220VAC, 60Hz, 1Ph, 9Amps

    ELEC3 1.5 Hp, 220VAC, 50 Hz, 1Ph, 8 Amps

    Brochures

    SSR Multipro JR. Roof Machine Brochure (English)

    SSR Multipro JR Roof Machine Brochure (Esp)

    Manuals

    SSR Roof Panel Machine Manual

    SSR Roof Panel Machine Manual (Esp)

    Warranty & Patents

    Warranty:
    • Three years parts (including electrical) / Three years labor
    • Limited lifetime separation on drive rollers
    • Limited lifetime on stainless steel forming rollers
    Patents:
    • U.S. PATENT NO. 6,772,616

     

    Reviews

    There are no reviews yet.

    Be the first to review “SSR™ MultiPro JR. Roof Panel Machine”

    Your email address will not be published. Required fields are marked *

    *

    code

    Related products