Notched Panel Features

• Notches are punched before the legs are formed for a clean cut
• Finished panel has a 1” (25.4mm) wide strip at each end for hemming
• Punches are hydraulically-powered and computer-controlled
• Notches can be offset for angled cuts
• Snap-seam panels can be made with a profiled flap to be used as a closure

Call KBS @ (713) 263-1522

Angled Slitter Features

• Attaches to the exit end of the SSQ II Roof Panel Machine
• Slits any angle from 90° to 35°
• Slits panels up to 24” (610mm) wide

Call KBS @ (713) 263-1522

NTM200 – Computer Controller

The NTM 200 comes standard with the new WAV wall panel machine, and is currently available for the SSQ II and SSH roof panel machines.

Improved Look & Operation:

• 12.1” color touch-screen
• Increased memory – program up to 600 different lengths
• Integrated coil length calculator
• Help & Error Screens
• Quickly transfer cut lists from a USB drive
• Removable, water resistant, suitcase style housing
• Quick / Easy entry from home screen
• Adjustable articulating arm
• Rotate, raise or lower controller for your perfect view

Call KBS @ (713) 263-1522

Variable Height Run Out Table – 10-Foot (3m) Sections

Conveyor style table attaches to shear and is used to support panel as it exits the machine. Two individually adjustable legs allow variation in height from 25” to 43”. Available in connectable 10 ft. sections.

Call KBS @ (713) 263-1522

Trailer
NATM Compliant, 12,000 lb. tandem axle trailer used for towing any NTM roofing machine directly to the jobsite. Equipped with crane lifting eyes, 4 drop-foot jack stands and electric brakes w/ breakaway kit.

Call KBS @ (713) 263-1522

Duel Overhead Reel Stand

Machine mount overhead stand for holding up to two Expandable Arbors with coil or two De-coiler Reels with coil for a combined total capacity of 6,000 lbs.

Call KBS @ (713) 263-1522 

Expandable Arbor

Used for holding coil. This arbor expands to the inside diameter of the coil for faster, easier loading. Can accommodate coils with 16” to 20” ID. Capacity is 3,000 lbs. when used with Dual Overhead Reel Stand or Single Free Standing De-Coiler.

Call KBS @ (713) 263-1522

Quick Change Power Pack

Used to quickly field convert machine from gas engine to electric motor and back again as needed.

Call KBS @ (713) 263-1522

PLC09 – Computer Control

New Tech Machinery’s new computer controller was developed after years of customer feedback. The controller integrates a myriad of options and features that end users have requested. Operation of the controller is designed for simplicity, with help and error screens to assist the user.

• Water Resistant Carrying Case
• Easy Touch Screen Operation with Adjustable Brightness
• Program up to 99 Jobs or Lengths
• Calibrate on the Fly
• Calibrate using a part run from a programmed job to save coil
• Password protection
• Separate supervisor and user permissions to track machine and coil usage
• Track Material
• Totalizing counter with password protected reset
• Track 3 separate coils differentiated by color with password protection capability
• Integrated Coil Length Calculator
• Measure the coil dimensions and calculate the approximate length
• Auxiliary Shearing
• Help and Error Screens

Call KBS @ (713) 263-1522

Single Free Standing De-Coiler

A Remote stand used at the entry end of the machine to hold one Expandable Arbor with coil or one De-Coiler Reel with coil. Total capacity 3,000 lbs. ~ Shown With Optional Arbor

Call KBS @ (713) 263-1522

Pencil, Bead, V and Striation Rollers
A variety of ribs used to aesthetically enhance standing seam panels.

Call KBS @ (713) 263-1522

Machine Cover

Machine Cover K-Tex synthetic canvas material, form fitted to body of machine.

Call KBS @ (713) 263-1522